|
 | | SYS-5019S-M2 | - SuperServer 5019S-M2 (Black)
|
| | |
| | CPU | - Single Socket H4 (LGA 1151) supports:
- Intel® Xeon® processor E3-1200 v5,
Intel® 6th Gen Core™ i7/i5/i3,
Intel® Pentium®,
Intel® Celeron® processors - CPU TDP up to 80W
|
| | |
| | Memory Capacity | - 4x 288-pin DDR4 DIMM slots
- Up to 64GB DDR4 Non-ECC UDIMM
| | Memory Type | - 2133/1866/1600MHz Non-ECC DDR4 SDRAM 72-bit, 288-pin (UDIMM) gold-plated DIMMs
| | DIMM Sizes | | | Memory Voltage | |
| | |
| | Chipset | | | SATA | - 4x SATA3 (6Gbps) via Intel® C236 controller
- RAID 0, 1, 5, 10 support
| | IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
| | Network Controllers | - Intel® PHY i219LM + Intel® i210AT Gigabit Ethernet LAN Controllers
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
| | Audio | - RealTek ALC 888S High Definition Audio
| | Video | |
| | |
| | SATA | | | LAN | - 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
| | USB | - 2x USB 3.0 ports (2 rear)
- 3x USB 2.0 ports (2 rear + 1 Type A)
| | Audio | | | Video/Display | - 2x DP (Display Port), 1x DVI-I from Intel® HD Graphics, 1x VGA from AST2400
- 3x Independent Displays from Processor Graphics, VGA is from AST2400 for BMC KVM
| | Serial Port / Header | | | SuperDOM | - 1x SuperDOM (Disk on Module) ports with built-in power
|
| | |
| | Voltage | - Monitors for CPU Cores, +3.3V, +5V, +12V, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
| | FAN | - Total of 5 fan headers supporting up to 5 fans
- 4 fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
| | Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
| | LED | - CPU / System Overheat LED
- Suspend static indicator LED
- UID/Remote UID
| | Other Features | - Chassis intrusion detection
- Chassis intrusion header
- Chipkill support
- RoHS, Halogen Free
|
|  | | |
| | Form Factor | | | Model | |
| | |
| | Height | | | Width | | | Depth | | | Package | - 8.5" (H) x 24" (W) x 29.5" (D)
| | Weight | - Gross Weight: 30.4 lbs (13.8 kg)
- Net Weight: 17.6 lbs (8 kg)
| | Available Colors | |
| | |
| | Buttons | - Power On/Off button
- System Reset button
| | LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
|
| | |
| | PCI-Express | - 1x PCI-E 3.0 x16 FH, FL slot
|
| | |
| | Hot-swap | - 4x 3.5" Hot-swap SATA3 drive bays
|
| | |
| SAS/SATA HDD Backplane
(SAS support requires optional SAS controller) |
| | |
| | Fans | |
| | |
| | 350W AC power supply w/ PFC | | AC Voltage | - 100-240 V, 50-60 Hz, 4.2-1.8 Amp
| | +5V | - Max.: 15 Amp
- Min.: 0.2 Amp
| | +5V standby | | | +12V | - Max.: 29 Amp
- Min.: 0.5 Amp
| | -12V | | | +3.3V | - Max.: 12 Amp
- Min.: 0.2 Amp
| | Certification |  Platinum Level Certified
[ Test Report ] |
| | |
| | BIOS Type | - 8MB SPI Flash EEPROM with AMI BIOS
| | BIOS Features | - DMI 2.3
- PCI 2.3
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
|
| | |
| RoHS
| | | Environmental Spec. | - Operating Temperature:
10°C to 35°C (50°F to 95°F) - Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F) - Operating Relative Humidity:
8% to 90% (non-condensing) - Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|