|
 | SYS-5018D-MF | - SuperServer 5018D-MF (Black)
|
| |
 | CPU | - Intel® Xeon® processor E3-1200 v3/v4 family, 4th Gen Core i3, Pentium, Celeron processors
- Socket H3 (LGA 1150)
|
| |
 | Memory Capacity | - 4x 240-pin DDR3 DIMM slots
- Supports up to 32 GB DDR3 ECC Un-Buffered memory (UDIMM)
| Memory Type | - 1600MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
| DIMM Sizes | | Memory Voltage | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
 | Chipset | | SATA | - SATA3 (6Gbps) w/ RAID 0, 1
- SATA2 (3Gbps) w/ RAID 0, 1, 5, 10
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 with 10/100/1000Mbps
| Network Controllers | - Intel® i217LM + Intel® i210AT Controllers
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
| VGA | |
| |
 | Serial ATA | - 2x SATA3 (6Gbps) ports
- 4x SATA2 (3Gbps) ports
- SATA DOM Power Connector
| LAN | - 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
| USB | - 6x USB 2.0 ports (4 rear, 2 via header)
- 2x USB 3.0 ports (1 Type-A, 1 via header)
| VGA | | Serial Port / Header | - 1x Fast UART 16550 serial port
- 1x internal header
|
| |
 | Voltage | - Monitors for CPU Cores, +12V, +3.3V, +5V,+5V Standby, VBAT, HT, Memory, Chipset Voltages.
- 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
| FAN | - Total of five 4-pin fan headers supporting up to 5 fans
- 5x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Support 3-pin fans (w/o speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- FC temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
| LED | - CPU / System Overheat LED
- +5V Standby alert LED
| Other Features | - Chassis intrusion detection
- Chassis intrusion header
|
|  |  | |
 | Form Factor | | Model | |
| |
 | Height | | Width | | Depth | | Weight | - Gross Weight: 16.2 lbs (7.4 kg)
- Net Weight: 12 lbs (5.3 kg)
| Available Colors | |
| |
 | Buttons | - Power On/Off button
- System Reset button
| LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
|
| |
 | PCI-Express | - 1x PCI-E 3.0 x8 (in x16) Full-height slot
|
| |
 | Internal HDDs | - 2x 3.5" internal SATA3/2 HDD bays w/ RAID (2.5" optional)
|
| |
 | DVD-ROM | - Slim DVD-ROM Drive (optional)
|
| |
 | Fans | |
| |
 | 350W AC power supply w/ PFC | AC Voltage | - 100-240 V, 50-60 Hz, 4.2-1.8 Amp
| +5V | | +5V standby | | +12V | | +3.3V | | Certification |  Gold Certified [ Test Report ] |
| |
 | BIOS Type | - 128Mb SPI Flash EEPROM with AMI BIOS
| BIOS Features | - DMI 2.3
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
|
| |
 | Software | - IPMI (Intelligent Platform Management Interface) v2.0 with KVM support
- SuperDoctor® III
- Watch Dog
- NMI
| Power Configurations | - ACPI / ACPM Power Management
- Main Switch Override Mechanism
- Power-on mode for AC power recovery
- Internal/External modem ring-on
|
| |
 | RoHS
| - RoHS2 (2011/65/EU) Compliant
| Environmental Spec. | - Operating Temperature:
10°C to 35°C (50°F to 95°F) - Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F) - Operating Relative Humidity:
8% to 90% (non-condensing) - Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|