2012259

/search

Hatteland_FI_D4

Products

Total hit count:

See full result...

Categories

Brands

Brand names

Articles

Number of articles found:

SYS-5018D-MTF 1USupermicro. Uten CPU/ram/HDD.

Product SKUs

SYS-5018D-MTF	SuperServer 5018D-MTF (Black)


Motherboard

Super X10SLM-F


Processor/Cache

CPU	Intel® Xeon® processor E3-1200 v3/v4 family, 4th Gen Core i3, Pentium, Celeron processors Socket H3 (LGA 1150)


System Memory

Memory Capacity	4x 240-pin DDR3 DIMM slots Supports up to 32 GB DDR3 ECC Un-Buffered memory (UDIMM)
Memory Type	1600MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes	8GB, 4GB, 2GB, 1GB
Memory Voltage	1.5 V
Error Detection	Corrects single-bit errors Detects double-bit errors (using ECC memory)


On-Board Devices

Chipset	Intel® C224 Express PCH
SATA	SATA3 (6Gbps) w/ RAID 0, 1, 10, 5 SATA2 (3Gbps) w/ RAID 0, 1
IPMI	Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2400 BMC with 10/100/1000Mbps
Network Controllers	Intel® i217LM + Intel® i210AT Controllers Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201N PHY (dedicated IPMI)
VGA	ASPEED AST2400 BMC


Input / Output

Serial ATA	4x SATA3 (6Gbps) ports 2x SATA2 (3Gbps) ports SATA DOM Power Connector
LAN	2x RJ45 LAN ports 1x RJ45 Dedicated IPMI LAN port
USB	4x USB 3.0 ports (1 Type-A, 2+1 via header) 6x USB 2.0 ports (4 rear, 2 via header)
VGA	1x VGA port
Serial Port / Header	1x Fast UART 16550 serial port 1x internal header


PC Health Monitoring

Voltage	Monitors for CPU Cores, +12V, +3.3V, +5V,+5V Standby, VBAT, HT, Memory, Chipset Voltages. 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
FAN	Total of five 4-pin fan headers supporting up to 5 fans 5x fans with tachometer status monitoring Status monitor for speed control Status monitor for on/off control Support 3-pin fans (w/o speed control) Low noise fan speed control Pulse Width Modulated (PWM) fan connectors
Temperature	Monitoring for CPU and chassis environment CPU thermal trip support FC temperature sensing logic Thermal Monitor 2 (TM2) support PECI
LED	CPU / System Overheat LED +5V Standby alert LED
Other Features	Chassis intrusion detection Chassis intrusion header


Chassis

Form Factor	1U Rackmount
Model	CSE-813MTQ-350CB


Dimensions and Weight

Height	1.7" (43mm)
Width	17.2" (437mm)
Depth	19.8" (503mm)
Weight	Gross Weight: 30.4 lbs (13.8 kg) Net Weight: 17.6 lbs (8 kg)
Available Colors	Black


Front Panel

Buttons	Power On/Off button System Reset button
LEDs	Power LED Hard drive activity LED 2x Network activity LEDs System Overheat LED
Ports	2x USB ports 1x Serial COM Port


Expansion Slots

PCI-Express	1x PCI-E 3.0 x8 (in x16) Full-height slot*


Drive Bays

Hot-swap	4x 3.5" Hot-swap SATA3 HDDs w/ RAID
Peripheral Bay	Slim optical drive (optional)


Backplane

SAS2/SATA3 HDD Backplane (SAS support requires optional SAS controller)


System Cooling

Fans	4x 4cm 12,500 RPM PWM fans Optional fans to cool add-on cards


Power Supply

350W AC power supply w/ PFC
AC Voltage	100-240 V, 50-60 Hz, 4.2-1.8 Amp
+5V	18 Amp
+5V standby	3 Amp
+12V	29 Amp
+3.3V	15 Amp
Certification	Gold Certified [ Test Report ]


System BIOS

BIOS Type	128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features	DMI 2.3 PCI 2.3 ACPI 1.0 / 2.0 USB Keyboard support SMBIOS 2.3


Management

Software	IPMI (Intelligent Platform Management Interface) v2.0 with KVM support SuperDoctor® III Watch Dog NMI
Power Configurations	ACPI / ACPM Power Management Main Switch Override Mechanism Power-on mode for AC power recovery Internal/External modem ring-on


Operating Environment / Compliance

RoHS	RoHS2 (2011/65/EU) Compliant
Environmental Spec.	Operating Temperature: 10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing)

SYS-5018D-MTF 1U Supermicro. Uten CPU/ram/HDD.

Accessories

Alternatives

Articles

Number of articles found:

Teollisuustietokoneet

SYS-5018D-MTF 1U

Supermicro. Uten CPU/ram/HDD.

Product nr: 118976

SYS-5018D-MTF 1U Supermicro. Uten CPU/ram/HDD.

Description

Product SKUs

SYS-5018D-MTF	SuperServer 5018D-MTF (Black)


Motherboard

Super X10SLM-F


Processor/Cache

CPU	Intel® Xeon® processor E3-1200 v3/v4 family, 4th Gen Core i3, Pentium, Celeron processors Socket H3 (LGA 1150)


System Memory

Memory Capacity	4x 240-pin DDR3 DIMM slots Supports up to 32 GB DDR3 ECC Un-Buffered memory (UDIMM)
Memory Type	1600MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes	8GB, 4GB, 2GB, 1GB
Memory Voltage	1.5 V
Error Detection	Corrects single-bit errors Detects double-bit errors (using ECC memory)


On-Board Devices

Chipset	Intel® C224 Express PCH
SATA	SATA3 (6Gbps) w/ RAID 0, 1, 10, 5 SATA2 (3Gbps) w/ RAID 0, 1
IPMI	Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2400 BMC with 10/100/1000Mbps
Network Controllers	Intel® i217LM + Intel® i210AT Controllers Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201N PHY (dedicated IPMI)
VGA	ASPEED AST2400 BMC


Input / Output

Serial ATA	4x SATA3 (6Gbps) ports 2x SATA2 (3Gbps) ports SATA DOM Power Connector
LAN	2x RJ45 LAN ports 1x RJ45 Dedicated IPMI LAN port
USB	4x USB 3.0 ports (1 Type-A, 2+1 via header) 6x USB 2.0 ports (4 rear, 2 via header)
VGA	1x VGA port
Serial Port / Header	1x Fast UART 16550 serial port 1x internal header


PC Health Monitoring

Voltage	Monitors for CPU Cores, +12V, +3.3V, +5V,+5V Standby, VBAT, HT, Memory, Chipset Voltages. 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
FAN	Total of five 4-pin fan headers supporting up to 5 fans 5x fans with tachometer status monitoring Status monitor for speed control Status monitor for on/off control Support 3-pin fans (w/o speed control) Low noise fan speed control Pulse Width Modulated (PWM) fan connectors
Temperature	Monitoring for CPU and chassis environment CPU thermal trip support FC temperature sensing logic Thermal Monitor 2 (TM2) support PECI
LED	CPU / System Overheat LED +5V Standby alert LED
Other Features	Chassis intrusion detection Chassis intrusion header


Chassis

Form Factor	1U Rackmount
Model	CSE-813MTQ-350CB


Dimensions and Weight

Height	1.7" (43mm)
Width	17.2" (437mm)
Depth	19.8" (503mm)
Weight	Gross Weight: 30.4 lbs (13.8 kg) Net Weight: 17.6 lbs (8 kg)
Available Colors	Black


Front Panel

Buttons	Power On/Off button System Reset button
LEDs	Power LED Hard drive activity LED 2x Network activity LEDs System Overheat LED
Ports	2x USB ports 1x Serial COM Port


Expansion Slots

PCI-Express	1x PCI-E 3.0 x8 (in x16) Full-height slot*


Drive Bays

Hot-swap	4x 3.5" Hot-swap SATA3 HDDs w/ RAID
Peripheral Bay	Slim optical drive (optional)


Backplane

SAS2/SATA3 HDD Backplane (SAS support requires optional SAS controller)


System Cooling

Fans	4x 4cm 12,500 RPM PWM fans Optional fans to cool add-on cards


Power Supply

350W AC power supply w/ PFC
AC Voltage	100-240 V, 50-60 Hz, 4.2-1.8 Amp
+5V	18 Amp
+5V standby	3 Amp
+12V	29 Amp
+3.3V	15 Amp
Certification	Gold Certified [ Test Report ]


System BIOS

BIOS Type	128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features	DMI 2.3 PCI 2.3 ACPI 1.0 / 2.0 USB Keyboard support SMBIOS 2.3


Management

Software	IPMI (Intelligent Platform Management Interface) v2.0 with KVM support SuperDoctor® III Watch Dog NMI
Power Configurations	ACPI / ACPM Power Management Main Switch Override Mechanism Power-on mode for AC power recovery Internal/External modem ring-on


Operating Environment / Compliance

RoHS	RoHS2 (2011/65/EU) Compliant
Environmental Spec.	Operating Temperature: 10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing)